Chapter 3. Operating The Uninterruptible Power Supply; Control Panel - IBM 1000 VA LCD Installation And Maintenance Manual

Chapter 3. Operating the uninterruptible power supply

This chapter describes how to use the uninterruptible power supply and includes
information about the following topics:
v Control panel
v Operating modes
v Turning on and turning off the uninterruptible power supply
v Display functions
v Retrieving the alarm history
v Behavior on overload
v Configuring load segments, battery settings, and automatic restart

Control panel

The following illustration shows the display and controls on the front of the
uninterruptible power supply.
Escape
button
The uninterruptible power supply has a graphical liquid crystal display (LCD) with
dual color backlight. Standard backlight is used to light the display with white text
and a blue background. The display flashes if any alarms are active.
There are three control buttons and one on/off button on the front panel:
Escape (X): Press this button to return to the previous menu without running a
command or saving any changes.
Down (
this button provides faster scrolling on some menus.
OK: Press this button to select the current menu or option. On the following
screens, press and hold this button longer than 1 second:
v On the User Setting screens, to save the displayed setting.
© Copyright IBM Corp. 2010
LCD control panel
100% 6
1500
min
VA
230 /60HZ
V
UPS ON
OK
On/Off Down OK
button button button
): Press this button to scroll down to the next menu option. Holding down
19