Index; Product Features; System Requirements; Driver Installation (Win2000/Xp) - Digitus USB TO SERIAL CONVERTER User Manual

Index:

A. Windows Driver
B. MAC Driver
C. Linux Driver
A. Windows Driver

1. Product Features

2. System Requirements

3. Driver Installation (Win2000)
4. Changes COM Port
5. Setting up the RS232 Serial Device
1. Product Features
 USB Specification Rev. 1.1 compliant
 Support the RS232 Serial interface
 Over 1Mbps data transfer rate
 Supports remote wake-up and power management
2. System Requirements
 IBM PC 486DX4-100 MHz CPU or higher or compatible system
 Available USB port
 CD-ROM drive
 Windows 2000/XP/Vista7/8

3. Driver Installation (Win2000/XP)

Follow the steps below to install Window 2000/XP driver of USB-Serial cable:
1. Power on your computer and make sure that the USB port is enabled and
working properly.
2. During installation, please don't link USB-Serial cable with your computer.
3. Double click 'setup.exe', then it will start installation
4. After installation, click 'OK '