Download Print this page


User Manual


   Related Manuals for Digitus USB TO SERIAL CONVERTER

   Summary of Contents for Digitus USB TO SERIAL CONVERTER

  • Page 1

    USB TO SERIAL CONVERTER User Manual (DA-70155-1)

  • Page 2: Product Features

    Index: A. Windows Driver B. MAC Driver C. Linux Driver A. Windows Driver 1. Product Features 2. System Requirements 3. Driver Installation (Win2000) 4. Changes COM Port 5. Setting up the RS232 Serial Device 1. Product Features  USB Specification Rev. 1.1 compliant ...

  • Page 3

    5. Plug in the USB-Serial cable into the USB port and run the Found New Hardware Wizard to assist you in setting up the new device. Click next to continue. 6. Click Next to continue. Select the “Search for a suitable driver for my device (recommend)“...

  • Page 4

    7. Windows will detect the driver and Click Next to continue installation. 8. Click Finish to continue and let Windows copy the needed files to your hard disk.

  • Page 5

    9. You can to check the Device Manager and see the Prolific USB to Serial Com Port) 4. Driver Installation (Windows7/8) Follow the steps below to install Windows7/8 driver of the USB to RS232 Converter 1. Power on your computer and make sure that the USB port is enabled and work. 2.

  • Page 6

    4. When the installation has finished a completion screen is displayed. 5. After installation, click ”Finish”.

  • Page 7

    6. Plug in the USB TO RS232 into the USB Port and Press the Windows start button to bring up the start menu and select “Control Panel” 7. From the Control Panel window select Hardware and Sound...

  • Page 8

    8. At the next screen select Device Manager 9. Under the menu item "Device Manager" you can check the installation of the USB serial interface.

  • Page 9

    4. Changes COM Port 1. Under Windows 2000, Windows XP, Windows 7, Windows 8 please kindly follow the steps as below. (1) Please click on the Device Manager\ Devices by connection \ ports (COM & LPT). (image 1) (2) Doubly click on “Prolific USB-to- serial Com port (COM3)”. And it could go to ‘properties'.

  • Page 10

    (3) Please choose "Port Settings ", and then click on "Advanced". Please kindly choose the needed com, and click on" ok”. (image 3) (image 3) Notice: If the Modem could not link with the new port, and run smoothly when changed the port, please kindly unload Modem, and re-install it.

  • Page 11: Driver Installation

    3. System Requirements 4. Driver Installation 1. Overview Congratulations on your purchase of the DIGITUS DA-70155-1 USB-Serial Converter. This device provides a simple and easy way to connect Universal Serial Bus (USB) and Serial port interface. With the advantage of USB port, users have the capability to utilize the peripheral with serial port interface in an easy to use environment such as plug and play &...

  • Page 12

    2. Product Features  USB Specification Rev. 1.1 compliant  Support the RS232 Serial interface  Over 1Mbps data transfer rate  Support remote wake-up and power management 3. System Requirements  Power G3 OR G4 CPU or higher or compatible system ...

  • Page 13

    5. To make sure that your computer can use the device correctly, you have to check the Apple System Profiler-Device and Volumes. It will show the USB Device. C. Linux Driver I am believed that you already have PL-2303X/H Linux driver source, and you also know how to compile it in Linux, so I only explain how to link device with our driver.

Comments to this Manuals

Symbols: 0
Latest comments: