Network-Configuration Utility; Using Configuration Utility - Planet WNL-9331 User Manual

3-2 Network-Configuration Utility

After the driver is correctly installed, it will try to connect to any unencrypted wireless access
point automatically. If you want to connect to a specific wireless access point, or the access
point you wish to connect uses encryption, you have to configure the wireless network card
and input required parameters, to get connected to the wireless access point you wish to
connect.

3-2-1 Using configuration Utility

The current status of wireless connection will be displayed by WNL-9331 configuration utility
icon:
Wireless connection is established, good signal reception.
Wireless connection is established, normal signal reception.
Wireless connection is established, weak signal reception.
Wireless network doesn't connection.
Wireless network card is not detected.
There are two ways you can configure WNL-9331 network card to connect to wireless access
point: using the WNL-9331 configuration utility and using built-in windows zero
configuration utility.