Table of Contents
Advertisement
(Key1 ~ Key4)
There are
encryption key from Key 1 to Key 4 by selected the radio button.
Fill the text box by following the rules below:
6
4-bit – Input 10-digit Hex values (in the "A-F", "a-f" and "0-9" range) or 5-digit
ASCII characters (including "a-z" and "0-9"
example: "0123456aef" or "test1".
128-bit – Input 26-digit Hex value
1
3-digit ASCII characters (including "a-z" and "0-9") as the encryption keys.
For example: "01234567890123456789abcdef"or "administrator".
3-1-3 Using
802.11x
To set 802.1x authentication f
Here are descriptions of every setup item:
Parameter
Description
EAP Method
Select 802.1x EAP method from dropdown menu. Please ask the
administrator
method.
Tunnel
Select 802.1x tunnel authentication type from dropdown menu. Please ask
Authentication
the admin
tunnel authentication method. This pull down menu is only available when
authentication type you use is 'PEAP', 'TLS / Smart Card', or 'TTLS'.
When you use 'EAP-FAST' as authentication type, the protocol setting
a
lways 'Generic Token Card' and can not be changed. You also need to
select 'Soft Token' or 'Static Password' as password in 'ID \ Password'
two types of key length: 64-bit and 128-bit. Select the default
or the access point. Please click '802.1X' tab:
of the access point you wish to connect to select a correct EAP
istrator of the access point you wish to connect to select a correct
) as the encryption keys. For
s (in the "A-F", "a-f" and "0-9" range) or
is
Advertisement
Table of Contents
