Planet WNL-9331 User Manual page 28

If a symbol appears in front of the name of wireless device, means you've
established connected with that wireless device.
B
The type of this wireless device and the channel number of this wireless device.
Means this wireless device is an access point
Means this wireless device is a computer (Ad-Hoc mode, point-to-point
connection)
C
The wireless standard supported by this access point is displayed here:
For 802.11n
For 802.11g
For 802.11b.
WS icon will appear when the access point supports WPS. If the access
point uses encryption,.
A key icon will appear
Note: When the access point supports WPS and WPS icon
will not see the key icon
D
Shows the signal strength of access point by percentage.
E
Shows the bar graph of the signal strength
1. If the access point you selected does not enable encryption (The content of 'Encryption' field
of the access point you selected is 'None', you'll be connected to this wireless access point
within one minute.
2. If the access point you selected enables encryption, please proceed to next step.
3. If the wireless access point does not have SSID, you'll be prompted to input it here. Please
ask the administrator of this AP and input the exact SSID here, then click 'OK' when ready. If
the SSID you provided here is wrong, you'll not be able to connect to this access point.
If the wireless access point you selected have SSID, please skip this step.
here even through the access point uses encryption.
is appeared, you