Chapter 2 Installation Procedure; Configuration Utility Installation - Planet WL-8313 User Manual

Chapter 2 Installation Procedure

Before you proceed with the installation, it is necessary that you have enough information about the
Wireless PCI Card. Follow the procedure described below in this chapter to install the PCI adapter
under Windows 98SE/Me/2000/XP/Server 2003.
Note: If you had ever installed the other Wireless Cards before, please uninstall the existed
drivers and utilities first. If this is the first time to install this device, please refer to the following
steps to complete the installation.

2.1 Configuration Utility Installation

Note: The following installation operates under Window XP. The procedure also applies to
Window 98SE/Me/2000/Server 2003..
Please install the configuration utility before inserting WL-8313 into the PCI slot of the computer.
1.
Insert the bundled CD into the CD-ROM drive to launch the autorun program. Once completed,
a menu screen will show up as follows.
Click the "Configuration Utility" hyperlink in the WL-8313 field to initiate the installation
2.
procedure. You will see the below InstallShield Wizard window. Please click "Next" to
continue.
Note: If the above-mentioned screen does not appear, click "Start" at the taskbar. Then,
select "Run" and type "E:\utility\WL-8313\setup.exe", where E is your CD-ROM drive.
- 6 - 6