Planet WNL-9331 User Manual page 36

2. Before you start to establish the wireless connection by using WPS, you can click 'Rescan'
button to search for WPS-enabled access points near you, to make sure the WPS function
of your access point is activated.
3. All access points found will be displayed. Please make sure the access point you wish to
connect is displayed. If not, please click 'Rescan' few more times. You can also click
'Information' button to see the detailed information about selected access point.
4. Click 'PBC' button now to start to establish wireless connection by WPS, and please be
patient (This may require several seconds to one minute to complete). When you see 'WPS
status is connected successfully' message, it means the connection between your
WNL-9331 and access point is successfully connected by WPS, and the information about
access point you connected to will be displayed.