Travis Industries DVL EF Owner's Manual page 29

Finalizing the Installation
Glass Frame Removal and Installation (continued)
The spring pin can come loose from the latch assembly. This occurs when it is turned 1/4 turn when it is
disengaged. Follow the directions below to re-install the spring pin if it becomes loose.
NOTE: The spring pins
can be installed with the
glass frame in place or
removed.
Travis Industries
To re-install the spring pin, first
insert this end into a 1/4" key.
Push in slightly and
twist 1/4 turn.
With this pin horizontal, the
spring pin will remain in place.
4041206
Insert the spring pin into
this bracket with the pins
aligned vertically.
1 0 0 - 0 1 1 4 7
2 9