Prohibition Setting; Smtp Server Ip Address; Authentication; Event Log - Monacor DMR404 User Manual

3.3.8.2

Prohibition setting

Set up prohibition time to transmit the e-mail. Users can enter prohibition time from the
starting time and the ending time of transmitting the e-mail
3.3.8.3

SMTP Server IP address

If you click ftp address , key board shaped will turn on the screen.
Put the suitable server address (ref.3.6.4.6(STATIC)& 3.6.6.4(PPPoE))
If you want Domain name instead of IP address under PPPoE, STATIC , a suitable DNS
server address should be at the network setting menu.
If you do not know your SMTP server IP address then go to Command Prompt in Windows,
then use ping and SMTP name address eg smtp.yahoo.com as below to get your SMTP IP
address. (Same method also applies to finding FTP server IP address from FTP name
address).
3.3.8.4

Authentication

Users can select authentication process dependent on SMTP server requirement.
Selects on/off for authentication process do authentication process whenever transmitting e-
mail messages through SMTP server.
3.3.9

Event Log

Shows the event log of the selected channel. It can reset periodically by setting e-mail as
described in paragraph 3.3.7.
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
49