Table of Contents
Advertisement
- Go to Preset : To move the Pan/Tilt drive to the position preset in Set Preset mode.
- Set Preset
- Iris
- Light
- Camera
- Aux
- Auto Pan
- Auto Iris
3.1.6 Spot
It is a spot monitor output channel and it designates specific channel user want to see.
Ref.1.4.2.
3.1.7 Sequence Time
It decides the viewing time of each channel during sequence mode at live mode.
2, 4, 5, 8, 10, 15, 30 sec are all selectable.
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
Figure. 3-7 Additional PTZ Menu
Preset numbers are selected by Left/Right buttons and the Pan/Tilt drive
moves to the preset position after pressing OK button.
: To preset the position of the Pan/Tilt drive. Users can preset 1-99 positions
selected by Left/Right buttons and save the preset by pressing OK button.
:
To open/close the camera lris by Left/Right buttons.
:
To turn on/off the camera lighting selected by Left/Right and OK buttons.
:
To turn on/off the camera itself selected by Left/Right and OK buttons.
:
To turn on/off the AUX (six) connected to the camera. On/off are selected
by Left/Right and OK buttons.
:
To automatically pan the camera. Pan speed are selected by Left/Right and
OK buttons.
:
To automatically Iris the camera.
36
Advertisement
Table of Contents
