Table of Contents
Advertisement
MENU: Press button to access Main Menu. Press again to return.
5. Direction/select button
UP:
Used to move the cursor up; change possible values in the setup menu; under
PTZ control sub menu, used to move camera; or used to adjust focus.
DOWN:
Used to move the cursor up; change possible values in the setup menu; under
PTZ control sub menu, used to move camera; or used to adjust focus.
LEFT:
Used to change possible values in the setup menu. Under PTZ control menu,
used to move the camera left or used to do Zoom Out; At playback mode, used to
decrease playback speed.
RIGHT:
Used to change possible values in the setup menu. Under PTZ control menu,
used to move the camera left or used to do Zoom In; At playback mode, used to
increase playback speed.
OK:
Used as a selection key. Under PTZ control menu, used to be interchanged P/T
mode with Z/F mode
6. Jog/Shuttle
Shuttle:
Multi-speed forward/reverse playback. Under Network Setup sub menu,
used to input parameters fast.
Jog:
Frame by frame search.
7. IR receiver
Remote control signal receiver
8. Playback
RECORD: Press once to begin recording all active channels. Press again to end recording.
R-PLAY: Reverse Playback. Press to begin reverse playback. Under PTZ control menu,
used to decrease the speed of Pan, Tilt, Zoom, Focus.
STOP:
Stop playback.
PLAY:
Access to playback.
- Playback button will activate assigned starting position and Channel at playback setup of
menu.
- At pause mode, it will release pause mode.
- Under PTZ control menu, used to increase the speed of Pan, Tilt, Zoom, Focus.
9. USB connector in the front panel
This connector is for USB Memory stick to back up the image
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
18
Advertisement
Table of Contents
