Program Setup; Dvr Recording - Monacor DMR404 User Manual

Digital hard disk recorder 4/8/16 channel, mpeg-4

Table of Contents

4.3.5 Program setup

If users click this button in the main window, window of program setup appears.

① Capture a still image and select a folder where the image is recorded

② Select the image of water mark to be input in the still image

③ Set up a program by user's language

④ Set up whether alarm occurrence is on or off when motion detection or sensor icon

activated.

⑤ Close the window without saving the setup

⑥ Close the window after saving the setup

It works as recording button of DVR system. After logging in admin, button will be

activated. Under recording mode at DVR, red icon will be displayed at the top of right at the

window.

4 & 8 & 16 Channel DVR Operation manual Revision 1.0

Table of Contents