IBM 51 Troubleshooting Manual page 133

COPCOM477E The alternate gateway port is not
correct.
Explanation: No additional information is available
for this message.
COPCOM478E The endpoint port is not correct.
Explanation: No additional information is available
for this message.
COPCOM479E The alternate endpoint port is not
correct.
Explanation: No additional information is available
for this message.
COPCOM480E The value for HTTP Disable must be
a 0, 1, 2 or 3.
Explanation: No additional information is available
for this message.
COPCOM481E The value for Broadcast Disable must
be a 0 or 1.
Explanation: No additional information is available
for this message.
COPCOM482E The Login Interval is not correct.
Explanation: No additional information is available
for this message.
COPCOM483E The Host Name is not correct.
Explanation: No additional information is available
for this message.
COPCOM486E The Software Installable is already
used by another module.
Explanation: No additional information is available
for this message.
COPCOM487E The resource group with ID:
"V ALUE_0" should only belong to one
cluster domain.
Explanation: No additional information is available
for this message.
COPCOM488E The system can not delete the
subnetwork with ID: "V ALUE_0", since it
is assigned to one or more access rules
or routes. Please review and delete them
first if necessary.
Explanation: No additional information is available
for this message.
COPCOM489E The system cannot delete "V ALUE_0"
access group because users "V ALUE_1"
are using it as the default access group.
Operator response: Make sure no user is using the
selected access group as default access group, and then
try again.
COPCOM490E The system cannot create the resource
group with name: "V ALUE_0", since
there already exists a resource group
with the same name in the same cluster
domain with ID: "V ALUE_1".
Operator response: Use a different resource group
name, and then try again.
COPCOM491E The system cannot find a valid
software installable.
Operator response: Validate software requirements,
and then try again.
COPCOM492E The system cannot delete the current
user "V ALUE_0".
Operator response: Please log on as another user that
has the proper privileges, and then try again.
COPCOM493E Invalid end time entered for
modifying subscription with ID
"V ALUE_0".
Operator response: Enter an end time that is later
than the start time and that is not in the past.
COPCOM494E Unable to connect to endpoint using
RXA.
Explanation: Ensure the username and password are
correct and that sshd or SMB is enabled on the
endpoint.
COPCOM495E Error connecting to endpoint using
RXA: V ALUE_0.
Explanation: No additional information is available
for this message.
COPCOM496E Error executing command on
endpoint using RXA: V ALUE_0.
Explanation: No additional information is available
for this message.
Chapter 10. Tivoli Intelligent Orchestrator messages
121