Compliance Messages - IBM 51 Troubleshooting Manual

Compliance Messages

COPDSE001E The system cannot update the given
guest access desired state element
because it is not stored in DCM. Its
SecurityDesiredStateElementId is
V ALUE_0, its
UserAccountDesiredStateElmentId is
V ALUE_1.
Explanation: No additional information is available
for this message.
COPDSE002E The system cannot update the given
root remote login desired state element
because it is not stored in DCM. Its
SecurityDesiredStateElementId is
V ALUE_0.
Explanation: No additional information is available
for this message.
COPDSE003E The system cannot represent the object
from class name as: V ALUE_0.
Explanation: No additional information is available
for this message.
COPDSE004E The system cannot update the
attribute because there is no field name
V ALUE_0 in the class V ALUE_1.
Explanation: No additional information is available
for this message.
COPDSE005E The system cannot update the
attribute because there is no setter
method name V ALUE_0 in the class
V ALUE_1.
Explanation: No additional information is available
for this message.
COPDSE006E The system cannot update the
attribute because the attribute value
V ALUE_0 cannot be converted into type
V ALUE_1.
Explanation: No additional information is available
for this message.
COPDSE007E The system cannot update the
attribute because no object with name
V ALUE_0 can be found.
Explanation: No additional information is available
for this message.
166
Tivoli Intelligent Orchestrator Problem Determination and Troubleshooting Guide
COPDSE008E The property with the key value
V ALUE_0 in the device with ID
V ALUE_1 is not defined.
Explanation: No additional information is available
for this message.
COPDSE009E The system cannot update the given
boot password enablement desired state
element because it is not stored in the
data center model. Its
SecurityDesiredStateElementId is
V ALUE_0.
Explanation: No additional information is available
for this message.
COPDSE010E The system cannot update the given
hard disk password enablement desired
state element because it is not stored in
the data center model. Its
SecurityDesiredStateElementId is
V ALUE_0.
Explanation: No additional information is available
for this message.
COPDSE011E The system cannot add the rule that is
not of type: V ALUE_0 to
DesiredStateElement with type as:
V ALUE_1.
Explanation: No additional information is available
for this message.
COPDSE012E The system cannot remove the rule
with ID V ALUE_0 from
DesiredStateElement with ID V ALUE_1
because the rule does not belong to the
given DesiredStateElement.
Explanation: No additional information is available
for this message.
COPDSE013E The system cannot update the given
AIX system logging desired state
element because it is not stored in the
data center model. Its
DesiredStateElementId is V ALUE_0.
Explanation: No additional information is available
for this message.
COPDSE014E The system cannot update the given
Linux system logging desired state
element because it is not stored in the
data center model. Its
DesiredStateElementId is V ALUE_0.