Operating Settings Learn Routine - Avital 4003 Installation Manual

Operating settings learn routine

The System Features Learn Routine dictates how the unit operates. The
programmable operating settings of this unit can be changed whenever
necessary through the computer-based Learn Routine. The Program push-
button switch plugged into the blue port,
transmitter to change the settings. It is possible to access and change
any of the feature settings using the Program switch. To program set-
tings, remember: key, Choose, Activate and Release.
To program the learn routine:
flashes twice. Menu Two has now been selected. Release the Program
switch after the desired Menu choice has been selected.
Once the Program switch has been pressed and released the desired
number of times, press it once more and
the LED will flash to indicate which feature you have accessed. For
example, groups of eight flashes would indicate access to the status
output feature (Feature 8 of menu 2).
© 2009 Directed Electronics. All rights reserved.
Key.
1. Turn the ignition on and then back off.
2. Select menu. Press and hold the Program switch.
When the LED flashes once, Menu One has been
selected. Continue to hold the switch until the LED
Choose.
3. Within 10 seconds, press and release
the Program switch the number of times correspond-
ing to the feature number you want to program.
(See Features Menu section.)
is used with a programmed
HOLD
it. After a second,
25