Server Driver Installation In Existing Netware 4.11 Server - IBM 16/4 Token-Ring User Manual

10. Perform the following COPY commands, making sure that the diskette that you
11. Go to the Novell server directory and enter server at the DOS prompt to
12. Install the latest available Novell patches for NetWare 4.11 now. Make sure to
13. Issue the down command to bring the server down.
14. Reboot the server by entering restart server.
15. Check for the following conditions to determine whether the adapter is working
If you experience problems, see "Chapter 4. Problem solving" on page 37.
For information concerning NetWare Server error messages, see "Appendix E.
Novell NetWare Server messages" on page 71.

Server driver installation in existing NetWare 4.11 Server

If Novell NetWare is already installed in your computer, perform the following steps
to install the adapter server device driver.
Note: If you are altering the configuration of a previously loaded adapter, unload
10. Select Select Drivers.
11. Press the Insert key to install the unlisted driver.
14
IBM 16/4 Token-Ring PCI Management Adapter
created in step 1 is inserted in drive A. Note that it will prompt you at each of
the following files to ask if you want to perform a file overwrite; it is OK to
overwrite these files.
restart the server.
select the Version 3.31 ODI LAN Updates for Hardware if given the
opportunity.
correctly and whether installation has been completed successfully:
v The device driver files are loading successfully. There are no error
messages.
v The adapter LEDs indicate normal operation. Green ON, Amber OFF. See
"Understanding the adapter LEDs and labels" on page 43.
that adapter before proceeding with these instructions.
1. Create a diskette containing the extracted files from the NETWAREP.EXE file
on the adapter CD-ROM.
2. Be sure that your adapter has already been installed in your computer. If it has
not, follow the instructions in "Chapter 2. Installing the adapter hardware" on
page 5.
3. Install the latest available Novell patches for NetWare 4.11. Make sure to
select the Version 3.31 ODI LAN Updates for Hardware if given the
opportunity. Return to the server console when the installation is complete.
4. Issue the down command from the server prompt to bring the server down.
5. Reboot the server by entering restart server.
6. Check to see if the device driver is loaded. If it is, unload it using the following
command: unload ibmtrpo
7. Type load install on the server.
8. Select Driver Options.
9. Select Configure Network Drivers.