Table of Contents
Advertisement
Hardware Installation
Note:
Please refer to the user manual that came with your personal
computer for detailed installation instructions.
Use the following procedure to install your PCI Serial I/O 8 Port
Adapter.
1.
Set the host computer system power switch to OFF and
disconnect the power cord.
2.
Locate a free PCI expansion slot.
3.
Insert and secure the board firmly into the expansion slot.
4.
Replace the power cord and turn the host computer system ON.
Software Installation
Refer to the Quick Start Card that came with the CD ROM for
detailed instructions on loading the Software Driver
PCI System Setup
Peripheral Component Interconnect (PCI) system architecture has a
design feature termed Plug and Play. This feature automatically
detects, identifies and configures the currently installed devices each
time the system is booted. Therefore, whenever an Adapter is
installed (or removed) in a PCI system, the Adapter is recognized and
configured immediately upon restart.
IBM Serial I/O SST-8P Installation Guide
560154_A.p65
3
3
11/25/98, 6:52 PM
Advertisement
Table of Contents
