3. Make the following line the first executable line in the AUTOEXEC.BAT file:
DOS, Novell, Windows, or Windows 95 (adapter driver in CONFIG.SYS)
1. Insert the CD-ROM in the drive.
2. Copy x:\pcisetup\pcisetup.dos (where x is your CD-ROM drive) to the root
3. Make the following line the first executable line in the CONFIG.SYS file:
OS/2
1. Insert the CD-ROM in the drive.
2. Copy x:\pcisetup\pcisetup.os2 (where x is your CD-ROM drive) to the root
3. Make the following line the first executable line in the CONFIG.SYS file:
Windows NT
1. Insert the CD-ROM in the drive.
2. From the File pull-down menu, select Run.
3. Type x:\pcisetup\pcisetnt (where x is your CD-ROM drive) in the path entry field.
4. Select OK.
Contacting IBM product support
You can call the following telephone numbers for product support:
Customers outside the U.S. and Canada should contact their place of purchase.
Downloading code from the Web
You can download the latest code from the following location on the Web:
Tech tips and frequently asked questions
To find tips about specific hardware and software situations, go to x:\startcd.htm on
the CD-ROM (where x is your CD-ROM drive.
Other performance enhancements
There is a white paper on this subject at the following location on the Web:
directory of the diskette from which the system boots.
directory of the disk from which the system boots.
PCISETNT.BAT will install PCISETUP.SYS as a device driver that will be loaded
each time the system is started.
1-800-237-5511
IBM Support Services (U.S. only)
1-800-772-2227
IBM HelpCenter
1-800-565-3344
HelpPC (Canada)
®
(U.S. only)
Chapter 4. Problem solving
47