Windows 2000; Installing The Driver For A First-Time Windows 2000 Installation - IBM 16/4 Token-Ring User Manual

2. On the next page, select Search for the best driver for your device and then
3. The next page of the wizard will ask where you would like to look for the device
4. Select Next to continue. Windows should find an updated device driver on the
5. The next page of the wizard should confirm that the hardware and device driver
6. The wizard reports after the files have finished copying that:
7. A dialog box displays the following message:
8. Check for the following conditions to determine whether the adapter is working
If you experience problems, see "Chapter 4. Problem solving" on page 37.

Windows 2000

Although Windows 2000 may automatically install a device driver for your adapter,
we recommend that you upgrade to the driver included with the adapter. Use the
following procedures to install the latest driver.

Installing the driver for a first-time Windows 2000 installation

If your adapter is already installed in a machine in which you are installing Windows
2000 for the first time, Windows 2000 may detect the adapter and install the default
driver. Use the following procedure to install the updated driver that came with your
adapter.
30
IBM 16/4 Token-Ring PCI Management Adapter
Select Next to continue.
select Next.
driver.
v If you are installing the device driver from the product CD-ROM, insert the
CD-ROM into the CD-ROM drive and make sure that the CD-ROM drive
checkbox is checked.
v If you are installing from a diskette that you built from the CD-ROM or from
the Web, insert the diskette and make sure that the Floppy disk drives
checkbox is checked.
diskette or the CD-ROM. Make sure that The updated driver is selected and
select Next.
are found. Select Next again to begin copying files.
Windows might prompt you for the driver diskette. Type the letter of your drive.
Windows might also prompt you for the Windows 98 CD-ROM in order to install
its default network protocols. Make sure that the location of your Windows 98
installation files (for example, d:\ or d:\win98 or c:\windows\catroot) appears in
the entry and select OK.
Select Finish to continue.
Remove the diskette or CD-ROM from your computer and select Yes.
correctly and whether installation has been completed successfully:
v The device driver files loaded successfully.
v The Device Manager (System control panel applet) reports that the device is
working correctly.
v The adapter LEDs indicate normal operation: Green ON, Amber OFF.