System expansions
Removing SmartCard reader from carrier
1
Removing WLAN module from carrier
Installing SmartCard reader and/or WLAN module
48
1
a
a
1
1
1
►
Loosen the screws (1).
►
Pull the SmartCard reader out of the carrier
in the direction of the arrow (2).
►
Loosen the screws (1).
►
Pull the WLAN module out of the holder in
the direction of the arrow.
►
Open the casing (see "Opening the
casing").
►
Remove the cover (1).
►
Break the plastic cover (2) out of the cover.
2
►
Insert a screwdriver into the opening and
break out the pre-stamped installation
opening by moving it backwards and
forwards.
A26361-K1008-Z120-1-7619, edition 1