Table of Contents
Advertisement
System expansions
Installing an additional serial port
The condition is that the mainboard has a free internal serial port.
There are two ways of installing an additional serial port:
1.
An additional serial interface can be installed in an angled installation bracket like a board.
►
Install the angled installation bracket with the serial port like a board (see "Installing a
board").
►
Connect the cable of the additional serial port to the connector on the mainboard.
2.
An installation opening for the serial port is provided on the rear panel of the casing. As a result,
no board slot is occupied when a second serial port is installed.
►
Insert a screwdriver into the opening and break out the pre-stamped installation opening
by moving it backwards and forwards.
►
Detach the pins of the serial port from the angled installation bracket.
►
Secure the serial port to the rear panel of the device with the pins.
►
Connect the cable of the additional serial port to the connector on the mainboard.
38
A26361-K1008-Z120-1-7619, edition 1
Advertisement
Table of Contents
