Installing and removing hard disk with EasyChange rails
►
Open the casing (see "Opening the casing").
Removing the hard disk
1
►
Press the EasyChange rails mounted on the hard disk together somewhat (1) and pull the hard
disk out of the casing in the direction of the arrow (2).
►
Disconnect all cables connected to the drive (data cable, power supply cable).
i
It may be necessary to modify the entry for the drive in the BIOS Setup.
►
Close the casing (see "Closing the casing").
A26361-K1008-Z120-1-7619, edition 1
1
2
►
Release the die EasyChange rails from the
hard disk.
System expansions
43