Table of Contents
Advertisement
System expansions
Installing the hard disk
►
Remove the new hard disk from the package.
►
Make the required settings (e.g. master/slave, cable select) on the drives (hard disks).
2
1
It may be necessary to modify the entry for the drive in the BIOS Setup.
i
EasyChange rails for a second hard disk are mounted in the drive cage.
Installing an removing USB interfaces
You can install USB interfaces on the front and back of the device. You can also install audio ports
on the front of the device.
44
1
►
Secure the EasyChange rails on the side of
the hard disk by inserting the upper pins of the
EasyChange rail in the corresponding holes of
the hard disk.
►
Plug in the cables on the hard disk.
►
Press the EasyChange rails mounted on the
hard disk together somewhat (1) and slide
the hard disk into the casing in the direction
of the arrow (2).
►
Close the casing (see "Closing the casing").
A26361-K1008-Z120-1-7619, edition 1
Advertisement
Table of Contents
