Fujitsu Siemens Computers ESPRIMO P Operating Manual page 42

System expansions
1
► Push the board up to its slot (1).
Ensure that the end of a long board without angle bracket fits into the corresponding guide of
the casing.
► Press the board into the slot so that it engages.
► Fasten the board into place with the screw (2).
► If necessary, connect the cables.
► Reinstall the fan casing if necessary (see "Installing the fan").
► Close the casing (see "Closing the casing").
If you have installed or removed a PCI board, check the relevant PCI slot settings in the
i
BIOS Setup. If necessary, change the settings. Further information is provided in the PCI
board documentation.
34
2
A26361-K1008-Z120-1-7619, edition 1