System expansions
Installing the fan
2
1
Installing and removing boards
!
Please take note of the section "Information about boards".
In the upper three slots you can install boards with a length of up to 230 mm, and in the lower slot
boards with a length of up to 315 mm.
The number, position and arrangement of the board slots on the mainboard can be found in the
manual for the mainboard. Boards may already be installed when the device is shipped.
32
►
Hook the fan into the hooks (1) in the base
of casing.
►
Fold the fan in the direction of the arrow (2)
until it engages.
►
Connect the previously disconnected fan
cable to the mainboard if necessary.
►
Close the casing (see "Closing the casing").
A26361-K1008-Z120-1-7619, edition 1