Installation And Connection(Bx35F/Bx50F/Bx50Fw) - Omron POWLI BX35F Instruction Manual

2. Installation and connection

2-2 Installation and connection(BX35F/BX50F/BX50FW)

Connection to back up your computer and peripherals
Before installing this device, make a record of the serial number of this device.
The serial number is required when contacting us about the device.
The serial number is written in the label on the unit.
(1) Disconnect all AC input plugs of your computer and peripherals from a wall outlet (commercial power).
(2) Install the unit.
Write the usage start date on the label on the top side. Also, by using the included UPS
monitoring software, possible to keep a record of usage start date by the software.
● Do not install the unit in any position other than those indicated below.
Horizontal BX35F/BX50F/BX50FW
● Do not position the unit in the ways shown below.
Wall outlet
(commercial power)
Front panel facing upward
Front panel
Note
Computer
Modem or other
peripheral
Vertical BX35F/BX50F/BX50FW
Front panel facing
downward
Front panel
Upside down
18
(Attach the included stand so
that the left side is the bottom.)
• Detach the rubber feet from the
bottom surface when positioning
vertically.
• Once the rubber feet are removed,
protrusions on the bottom surface will
become visible.
Align the stand with these protrusions
to attach it.
Vertical
(Right side at bottom)