Installation And Connection; Precautions And Notes On Installation And Connection - Omron BU1002SW Instruction Manual

2

. Installation and Connection

2 2
Installation and connection
2-1

Precautions and notes on installation and connection

Two or more people should work together to carry, unpack and install
the BU3002SW.
● Because the unit is heavy, you may injure yourself or drop the unit, or it may fall over.
Carry the unit considering its weight and balance, and place it on a stable
and robust base.
● Dropping or toppling the unit may cause injury.
● Approximate weight of the unit:
15.5 kg (BU1002SW)
35 kg (BU3002SW)
● If you drop the unit, stop using it and have it inspected and repaired.
For repair, contact us; ____
Keep plastic package bags out of reach of children.
● Children may suffocate if they place their heads into plastic bags.
Make sure to connect the AC input plug of the unit into a wall outlet
(commercial power) with rated input voltage (200 to 240V AC).
● Connecting to a wall outlet (commercial power) of a different rated input voltage may result
in fi re.
● The unit may fail.
When an abnormality (unusual sound or smell) occurs, turn OFF the
unit's power switch and disconnect the AC input plug from the wall
outlet.
Install the unit soon after the AC input plug is disconnected from the wall
outlet.
● When performing maintenance on the connected devices, follow the above instructions to
ensure safety.
Do not connect devices such as dryers, some solenoid valves, etc. ,
which have a half-wave rectifi er that allows only half-cycle AC power to
fl ow through.
● Overcurrent may damage the UPS.
Connect the BU1002SW to a wall outlet (commercial power) with a
capacity of 7.4A or more, and connect the BU3002SW to a wall outlet
(commercial power) with a capacity of 16A or more.
● Otherwise, the power cord may be heated.
● When equipment with the maximum output capacity is connected, a maximum current of 7.4A
(BU1002SW) or 16A (BU3002SW) flows.
Provide secure grounding.
● After checking the plug shape of the wall outlet, directly connect the AC input plug of the
unit to it. A failure or leak that occurs when the unit is not properly grounded may result in
electric shock.
Do not disassemble, repair, or modify the unit.
● Doing so may cause an electric shock or a fi re.
6
Caution
(for installation and connection)