Error Signals, Electronics - Permobil C400 Owner's Manual

Owner´s Manual Permobil C400
Error signals - Battery voltage
Indicator
Every time the wheelchair is started up, a check
is performed on parts of the wheelchair's elec-
tronics. If any faults have arisen in these parts,
this is shown on the control panel's battery volt-
age indicator by one or more blinking lights.
Constant Light
Everything is in order. How many lights are lit,
depends upon how much voltage there is in the
batteries. With fully charged batteries, all lights
are lit.
Slowly blinking red lights
The batteries need to be charged immediately.
Rapidly blinking, 1 - 10 lights
Error signals, an error has arisen and the wheel-
chair can not be driven.
Error Signals
The number of blinking lights indicate what the
problem could be.
• Note the number of blinking lights
• Turn off the wheelchair
• Turn the wheelchair back on again
If the error persists, count the number of blinking
lights, check possible causes and solutions in
the table on the adjoining page.
NOTE
Possible error signals on the battery voltage indicator are not displayed while the wheelchair is
being driven, they only first appear the next time the wheelchair is restarted.
WARNING
The remedying of errors that are indicated via the battery voltage indicator must be performed by
a person with sufficient expertise to be able to perform such in a professional manner. Always con-
tact an authorized serviceman when in doubt.
BATTERY VOLTAGE INDICATOR
1 2 3
BATTERY VOLTAGE INDICATOR
76
Troubleshooting Guide
10
9
8
7
6
5
4
3
2
1
PILOT+
4 5 6 7 8 9
VSI
10