Electrical System - Vsi Control Panel - Permobil C400 Owner's Manual

Power wheelchair
Hide thumbs Also See for C400:
Table of Contents

Advertisement

Owner´s Manual Permobil C400
Electrical System, VSI
Fuses/Charging Socket
Main Fuse 50A
Permobil C400 with VSI electronics is equipped with a 50A Main Fuse, which
shall be replaced if blown out.
The Main Fuse is located under the rear end of the chassis cover, behind the
seat lift.
Charging Socket
The Charging Socket is located at the bottom of the control panel.
Main Fuse, VSI
NOTE
Always shut off the Power Supply on the Control Panel before replacing the Main Fuse.
WARNING
THE MAIN FUSE MUST ONLY BE REPLACED BY PERSONS WITH GOOD KNOWLEDGE OF
THE WHEELCHAIR'S ELECTRICAL SYSTEM.
A blown out Main Fuse can involves larger electrical faults. The cause should be checked carefully
before the fuse is exchanged. Always contact an authorized serviceman or Permobil when in doubt.
Charging Socket, VSI
30
Design and Function, VSI

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents