Alarms Screen - AJA Ki PRO Installation And Operation Manual

NOTE:

Alarms Screen

Ki Pro v3.2
You can reorder the clips if you want by simply double-clicking to select and then
dragging them to the order you want. Note again that while clicking and dragging, the
filmstrip icon will appear and the operation will highlight the order in green.
You can only bring clips up in order, not down in order when dragging and dropping. This
means that if you want a clip to appear later in the order, you need to move the other clips
above it.
See "Using Playlists" on page 98
working with playlists.
Figure 30. Ki Pro Web Interface, Clips Screen
The Alarms display is present on each screen and constantly shows you the state of any
alarms in the system. The Alarms area normally contains a green box displaying, "None" if
there are no alarms. If an alarm is generated, the Alarms area displays a red box
containing text describing the alarm. If multiple alarms are generated, they appear as
multiple red boxes, each one containing text describing the associated alarm.
at the end of this chapter for an additional tutorial on
87 www.aja.com