Accessory Rod Kit Setup And Adjustment - AJA Ki PRO Installation And Operation Manual

Accessory Rod Kit
Setup and
Adjustment
Ki Pro v3.2
Figure 12. Exo-skeleton Camera Mounting
Alignment Mounting
Pin Screw
3
Locate the Camera
Mounting screw underneath
(2 sizes provided),
align pin to Camera base
and tighten the Mounting screw
to fasten securely.
Replace Mount on
Exo-skeleton when done,
and tighten Locking Knob
to lock camera in place.
Base Ki Pro Exo-skeleton
chassis with camera mount
An option that can be added is an accessory rod kit that adds plates to each side of the
Exo-skeleton frame so that 15mm user-supplied rods can be used with the camera. Rods
are handy for mounting battery packs, matte boxes, and a wide variety of other
accessories.
Figure 13. Rod Accessory Kit Option
Optional Rod Accessory Kit Assembly
2
Slide Mount
off of Exo-skelton
Knurled thumbscrews
secure Ki Pro chassis
to Exo-skeleton
Kit components:
2 endplates
4 screws (5/32 allen)
4 knobs with plastic washers
30
1
Loosen
Camera
Mount
Locking
Knob
www.aja.com