Interval Time; Camera Data - AJA Ki PRO Installation And Operation Manual

9.2 INTERVAL TIME

13.1 CAMERA DATA

Ki Pro v3.2
Determines the time period from which the interval frames are selected. These are the
options:
Second
Minute
Hour
Some cameras produce SDI ancillary data that users may want to transfer to their Ki Pro
recordings. Examples include: start/stop commands, timecode, reel name, clip name and
take. The CONFIG menu parameter 13.1 Camera Data is designed to address this use of
SDI ancillary data. The default for this parameter is "None"; when this is selected, no
camera metadata is passed to any of the Ki Pro parameters even if a camera with SDI
ancillary data is connected to the Ki Pro. If an appropriate camera is present and sending
appropriate SDI ancillary data and that camera manufacturer/model is selected from the
list, then AJA passes as much of the metadata that is available from the camera (and is
viable for AJA to support) into the Ki Pro's timecode value, file name, and other
applicable parameters. These are the options:
NONE (default)
RED One 24
RED One 25
RED Epic
Canon XF
Canon C300
Pana AF100
Sony F3
ARRI Alexa
This menu parameter has domain over an array of other Ki Pro parameters; selecting
Camera Data supersedes other parameter selections if valid ancillary data is present and
the camera is selected from the menu parameter.
The second from which interval frames are selected.
The minute from which interval frames are selected.
The hour from which the interval frames are selected.
Camera metadata is not passed to any of the Ki Pro Mini
parameters even if a camera with ancillary data is
connected to the Ki Pro.
Red One 24 Camera metadata available from the camera is
passed into the Ki Pro's timecode value, file name, and
other applicable parameters.
Red One 25 Camera metadata available from the camera is
passed into the Ki Pro's timecode value, file name, and
other applicable parameters.
Red Epic Camera metadata available from the camera is
passed into the Ki Pro's timecode value, file name, and
other applicable parameters.
Canon XF-series with SDI outputs will provide ancillary data
that produces start/stop commands and timecode values
but not clip naming.
Canon C300 cameras provide ancillary data that produces
start/stop commands and timecode values but not clip
naming.
Panasonic AG-AF100 series cameras provide ancillary data
that produces start/stop commands and timecode values
but not clip naming. If the camera is configured for 720p
23.98 (24), 720p 25 or 720p 29.97 (30) recording, this
Camera Data setting will also allow the extraction of these
frame rates for recording on the Ki Pro.
Sony PMW-F3 SDI outputs will provide ancillary data that
produces start/stop commands and timecode values but
not clip naming.
ARRI Alexa cameras provide ancillary data that produces
start/stop commands and timecode values; clip naming is
not yet supported.
61 www.aja.com