AJA Ki PRO Installation And Operation Manual page 29

Ki Pro v3.2
Figure 11. Exo-skeleton Option
Base Ki Pro Exo-skeleton
chassis with camera mount
Knurled thumbscrews
secure Ki Pro chassis
to Exo-skeleton
For most uses with an Exo-skeleton, you'll want to first mount the camera or camcorder
to the adjustable mount on top, before sliding in the Ki Pro unit and locking it. To mount
a camera, follow these steps:
1. Locate the camera mount locking knob on the Exo-skeleton and loosen it.
2. Slide the camera mount off of the mounting rail.
3. Place the camera on the mount, orienting the mount's alignment pin to camera's
corresponding pin socket. Once aligned, tighten the mounting screw to secure the
camera.
Slide the camera and mount back on the rail and tighten the locking knob.
29 www.aja.com