Using Presets - AJA Ki PRO Installation And Operation Manual

Using Presets

Ki Pro v3.2
NOTE: Depending on whether you have been reviewing clips, you may first be prompted to "Press
Stop" prior to entering the Media page to make Playlist selections; if this prompt appears, you
will be led to the Transport page where you can depress stop and then enter the Media page
Select a playlist from the Playlist parameter in the Media menu. Once a playlist is
selected, you will noticed that a double arrow indication will appear next to the selected
list in the Playlists portion of the web UI. If you go to the Transport portion of the web UI,
you will now notice that the playlist is cued up, ready for playback of the first clip in the
list. If you want to navigate within your list, you may use the fast forward and rewind
buttons or the select up/down buttons. You can loop playback of a list using the Media
menu parameters as well.
Management of the Playlists is made possible via the web UI; creation and management
of playlists from the front panel is not supported. An indication of a selected playlist is
presented on the front panel UI via menu parameter 15.3 Playlist. The selection of a
playlist does not survive reboots of the unit, but the playlists that are created do survive
reboots.
Beginning with version 3.0 firmware, Ki Pro offers a simple and efficient way to configure
multiple parameters of the device from a preset. You can store a preset configuration and
then recall that preset later to return Ki Pro to the stored configuration.
100 www.aja.com