Replacing The Microprocessor - IBM 2292 Hardware Maintenance Manual

2. Push the plastic tab to release the power supply.
3. Move the power supply outward from the computer.
4. To replace the power supply, reverse these steps.

Replacing the microprocessor

1. Shut down your operating system and turn off the computer.
2. Remove the cover. See "Removing the cover" on page 39.
3. Remove the air baffle covering the microprocessor on the system board by
squeezing the plastic tabs that secure the air baffle to the chassis.
42
Hardware Maintenance Manual Types 2292, 2273, 6043, 6343, 6349, 6350, 6790, 6791, 6792, 6793, 6794, 6795, 6823, 6825