Procedure For Tilting Up (Power Trim And Tilt Models) - Yamaha 115 Owner's Manual

Operation
on page 39. Never tilt the outboard mo-
tor while the engine is running. Severe
damage from overheating can result.
Do not tilt up the engine by pushing the
G
tiller handle (if equipped) because this
could break the handle.
EMU32720
Procedure for tilting up (power trim
and tilt models)
1. Place the remote control lever in neutral.
N
2. Press the power trim and tilt switch "
(up) until the outboard motor has tilted
up completely.
42
3. Pull the tilt support lever toward you to
support the engine.
ZMU03196
"
EWM00260
WARNING
After tilting the outboard motor, be sure
to support it with the tilt support knob or
tilt support lever. Otherwise the outboard
motor could fall back down suddenly if oil
in the power trim and tilt unit loses pres-
sure.
4. Models equipped with trim rods: Once
the outboard motor is supported with the
tilt support lever, press the power trim
and tilt switch "
trim rods.
ECM00250
CAUTION:
Be sure to retract the trim rods complete-
ly during mooring. This protects the rods
from marine growth and corrosion which
UP
ZMU04146
ZMU03432
" (down) to retract the