Troubleshooting - Canon G2000 Instruction Manual

Troubleshooting

Refer to this checklist first if you have any problems with your camera. Possible
explanations are given below each problem on the list — turn to the page
numbers in parentheses for more information.
Make sure that the camera is properly connected if you are using it with a TV or
VCR. Consult your dealer or service outlet if problems persist.
? Nothing happens when I press the
buttons.
? The camera turned itself off.
? The start/stop button doesn't
work.
? There's no picture in the
viewfinder.
• You haven't turned the camera on
(p. 13).
• You haven't loaded a cassette, or it is
set for erasure prevention (p. 11).
• The tape has reached the end.
• The battery pack is exhausted, or not
properly attached (p. 9, 52–53).
• You need to select a different
recording program to use that
function (p. 36–37).
• You left it in record pause mode for
more than about 5 minutes (p. 13).
• The battery pack is exhausted
(p. 9, 53).
• The program selector is not set to
camera mode (p. 13).
• You haven't loaded a cassette, or it is
set for erasure prevention (p. 11).
• The tape has reached the end.
• The program selector is not set to
camera mode (p. 13).
E
63