Installing The Backup Battery - Canon G2000 Instruction Manual

Installing the backup battery

E
Open the battery cover, and insert the
CR2025 lithium battery with the + side
facing out.
Close the battery cover into place.
• This backup battery allows the camera to remember the data and time and other
settings when the main power source is removed. It has a life span of about a
year.
When it needs replacing (or if it has not been installed), the "j" date display
flashes in the display. Remove the old battery by pushing it down and pulling it
out from the left side. Make sure to attach the power adapter to the camera first.
This way it will remember your chosen settings when you change the battery.
WARNING!
The battery used in this device may present a fire or chemical burn hazard if
mistreated. Do not recharge, disassemble, heat above 100°C (212°F) or
incinerate. Replace the battery with a Sony, Sanyo, Hitachi Maxell or
Panasonic CR2025, or Duracell DL2025. Use of another battery may present a
risk of fire or explosion. The used battery should be handed back to the
supplier for safe disposal.
Cautions:
• Do not pick up the battery using tweezers or other metal tools — this will cause a
short circuit.
• Wipe the battery with a clean, dry cloth to ensure proper contact.
• Keep the backup battery out of reach of children — if it is swallowed, contact a
physician immediately, as the battery case may break down and the battery fluids
damage the stomach and intestines.
• Do not disassemble, heat, or immerse the battery in water, to avoid the risk of
explosion.
54
CR2025