When you have finished recording
E
• Replace the lens cap.
• Unload the cassette.
• Set the program selector to OFF.
• Disconnect the power source.
Notes:
• To check that the camera is recording correctly, be sure to make a test recording
first.
• Before making important recordings, clean the video heads using Canon CC-8
Video Head Cleaning Cassette or a commercially available dry-type head cleaning
cassette.
• For tips on how to make better videos, see page 21.
Demonstration
To see a demonstration of the camera's main features, before loading the cassette,
go to the DEMONSTRATION option in the camera menu. Select the ON setting
and close the menu. The demonstration also starts automatically if the power has
been on for ten minutes without a cassette loaded into the cassette compartment.
(You can avoid this by turning the DEMONSTRATION to OFF through the
camera menu.) To cancel the demonstration once it has begun: push the menu
button, turn off the power, or load a cassette.
(see p. 23)
14
...
DEMONSTRATION
ON