Searching And Reviewing While Recording - Canon G2000 Instruction Manual

Searching and Reviewing While Recording

Record search
When the camera is in record pause mode, you can use record search to play the
tape forwards or backwards to find the point where you want to start or restart
recording. This is useful when you want to add a new scene to a previously
recorded cassette. By using record search, you can ensure a smooth join between
the new scene and the old one.
1. Make sure the camera is in record pause mode.
2. Press and hold the REC SEARCH + or – button while you check the
picture in the viewfinder.
• The + button plays the recording forwards and the – button plays it
backwards.
3. Release the button when you find the point where you want to start
recording.
• The camera returns to record pause mode.
Record review
When the camera is in record pause mode, you can use record review to play back
the last few seconds of your recording and then return automatically to record
pause mode. You can quickly make sure that a scene has recorded properly and
then go on to shoot the next scene.
1. Make sure the camera is in record pause mode.
2. Press the c c (rec review) button.
• The camera rewinds the tape, plays back the last few seconds, and returns to
record pause mode.
Note:
• Noise may appear on the screen during record search and record review.
E
35