Playing Back A Cassette - Canon G2000 Instruction Manual

Playing Back a Cassette

FADE BLC D.ZOOM
Safe cassette operation
When you turn the power off or remove the power source, be sure to set the
camcorder first to record pause, stop or still pause mode.
Turning the power off or removing the power source while the tape is moving
(during recording, play, rewind for example), will make the counter display
appear wrong or may cause tape damage.
You can use the viewfinder screen for instant, on-the-spot playback.
To play back your recordings on a TV, see p. 19–20.
To use the wireless controller, see p. 28.
1. Attach a power source and turn the program selector to PLAY.
2. Load the cassette.
3. Press the e button to start playback.
• To end playback, press the 3 button.
• To wind the tape forwards, stop playback and press the 1 (fast forward)
button.
• To wind the tape backwards, stop playback and press the ` (rewind)
button.
• If the playback picture is rough, clean the video heads using a Canon CC-8
Video Head Cleaning Cassette or a commercially available dry-type head
cleaning cassette.
Special playback
Still playback
To view the video as a still picture press the a button. To resume normal
playback, press it again, or press the e button. The camera automatically goes
into stop mode after about five minutes' playback pause.
Fast forward playback
To play back the recording at about 9 times normal speed, press and hold the 1
button during normal playback.
Rewind playback
For reverse playback at about 7 times normal speed, press and hold the `
button during normal playback.
POWER
REC SEARCH
E
17