Troubleshooting - Canon ZR850 Instruction Manual

• _®oTrouble?
Troubleshooting
If you have a problem with your camcorder, refer to this checklist. Consult your dealer
or a Canon Service Center if the problem persists.
Power Source
Problem L_
19
• Camcorder will not turn on.
• The camcorder switches off
by itself.
• The cassette compartment
cover will not open.
• The cassette compartment
stopped half way whiie
inserting/removing a tape.
• The LCD/viewflnder switches
on and off.
Battery pack will not charge.
Solution
Battery pack is exhausted. Replace or charge the battery pack.
Attach the battery pack correctly.
Use the compact power adapter.
Charge the battery pack in temperatures between 0 °C and
40 °C (32 °F and 104 °F).
Battery packs become hot with use and may not charge. When
the battery pack is outside the charging temperature range, the
CHG (charge) indicator will flash irregularly. The charging will
start once the battery pack temperature is below 40 °C (104 °F).
The battery pack is damaged. Use a different battery pack.
tf you connect a faulty power adapter or battery pack, the
CHARGE indicator flashes approx, twice per second and the
charging stops.
Check that the compact power adapter is correctly connected to
the camcorder.
RecordingtPlayback
Problem
Buttons will not work.
q3
21
"F_,_" flashes on the screen.
',_" flashes on the screen.
'_]" flashes on the screen.
'REMOVE THE CASSETTE"
appears on the screen.
The wireless controller will not
work.
Solution
Turn on the camcorder.
Load a cassette.
Disconnect the power source and reconnect it after a short time.
if the problem still persists, disconnect ail power sources
(including the battery pack and the backup battery). This will
reset all the camcorder's settings.
Load a cassette.
Battery pack is exhausted. Replace or charge the battery pack.
Condensation is detected. See reference page.
Remove the cassette and reinsert it.
Abnormal characters appear on
the screen. The camcorder
does not operate properly.
21
19
86
21
Set [WLREMOTE] to [ON].
The battery of the wireless controller is exhausted. Replace the
battery.
43
23
II