Setting The Date And Time - Canon G2000 Instruction Manual

Setting the Date and Time

E
1.JUN.2001
(see p. 23)
Choose whether to add the date and time to your recordings by selecting DATE
DISPLAY at the camera menu, and choosing one of the 3 options:
AUTO–10S:
OFF:
CONT.:
If you set the date display to AUTO–10S or CONT. but have not yet set the date
and time, –:– – appears in the viewfinder during record pause mode. This will not
be recorded.
30
1:23 PM
DATE DISPLAY•••CONT.
Adds the date and time to your recordings for the first 10 seconds
of each scene you record.
• The date/time display flashes in the viewfinder in record pause
mode.
The date and time will not be added to your recordings at any
time.
The date and time are recorded continuously.