Wind Deflector; Retention System - SCHUBERTH S2 Owner's Manual

D. THE HELMET
Turbulators
The patented turbulators on the top of the face
shield also optimise the aeroacoustic properties
when riding and prevent acoustic disturbances
in the form of whistling sounds that can be
created by smooth and straight edges.
Warning:
The improved sealing in the lower section of the helmet can
lead to an increased concentration of moisture inside the
helmet, and thus to misting of the face shield, sun visor and
eye glasses. This effect takes place when the helmet is not
in an airstream but the face shield is closed (e.g. behind high
motorcycle fairing or in immobile state at traffi c lights) and
the venting element in the chin section is thus unable to
function or to function adequately. If misting occurs, please
open the visor so that there is a small gap through which the
moisture can escape. Never ride with restricted vision.
62

8. WIND DEFLECTOR

The wind defl ector prevents the unpleasant effect of the wind
created as you ride fl owing into the helmet. In addition, the
riding noise in the helmet is reduced.
1. The wind defl ector is attached
by Velcro strips on the inside of
the acoustic collar and can be
removed when required to provide
an additional fl ow of fresh air,
especially in hot weather.
Tip:
The fi t of the bottom of the helmet is extremely important in
ensuring that the helmet is as quiet as possible. If you have a
smaller collar size, we recommend that you also wear a scarf.

9. RETENTION SYSTEM

The retention system of the S2 consists of a chinstrap that is
additionally secured with neckbands at the back of the helmet
shell (the anti-roll-off system, see section D.14.).
Chinstrap with Micro-Lock ratchet fastener
The S2 comes with a ratchet fastener. This
locking system is easy to use and
enables you to adjust the chinstrap
perfectly to your head every
time you put the helmet on.
63