Receiver Functions - ROBBE BLUE ARROW Operating Instructions Manual

12 11 10

Receiver functions:

No. Brief description Description
Pitch-axis (elevator) servo
1 ELEV
2 AILE Roll servo
Collective pitch servo
3 PIT
4 Unused Unused
5 THRO Throttle
6 Unused Unused
7 POWER CHECK Power check
8
SPARE SPARE
9 TAIL MOT Tail rotor motor
10 ELEV G.S Pitch-axis sensitivity adjuster
11 AILE G.S Roll sensitivity adjuster
12 ELEV / AILE EXT. Servo travel adjuster
8
Operating Instructions - BLUE ARROW Trainer CP S-FHSS RTB 2.4 GHz No. S2537
1
2
3
4
Roll
5
6 (aileron) servo
7
8
9
Collective
pitch servo
Function
To be connected to the pitch-axis servo
To be connected to the roll servo
To be connected to the collective pitch servo
Unused
To be connected to the speed controller's signal wire;
receives the control signals for the main drive motor
Unused
To be connected to the "Power Check" lead (low-voltage warning)
attached to the speed controller
Supplementary circuit board socket (S-FHSS module)
To be connected to the speed controller's signal lead for the tail rotor motor
Gyro gain adjuster, pitch-axis
Gyro gain adjuster, roll axis
Servo travel adjuster, pitch-axis and roll servo
Pitch-axis
(elevator) servo
Connector orientation
The white wire must face forward
The white wire must face forward
The white wire must face forward
Unused
The white wire must face forward
Unused
The red wire must face forward
The orange wire must face forward