Troubleshooting
Check
Are the IP address, the Subnet Mask, and the Gateway Address
for the access point and the projector set correctly?
Are the access point and the projector's subnet different?
The Slide Show cannot be displayed on the desired display when the multi-screen display function is being executed.
Check
Are you using PowerPoint 2002 or an earlier version?
For Windows
Applications are no longer displayed from the computer screen when the multi-screen display function is executed.
Check
Is another application running on the virtual display
For Windows
The mouse cursor is not displayed on the computer screen.
Check
Is EPSON Virtual Display installed?
For Windows
When connecting with EasyMP Network Projection the image is not displayed or the image is slow to appear.
Check
Did you try to play back movies with Media Player or try to
operate the screen saver preview?
When not using a DHCP, adjust each setting. s
Select Manual search from EasyMP Network Projection, specify the IP address, and connect.
p.31
s
To set and use two or more virtual displays
displays to one before displaying the Slide Show.
g
?
When EPSON Virtual Display is installed, another application sometimes runs on the virtual display. In this case,
set EPSON Virtual Display to "Off" in "Screen properties".
The mouse cursor was moved onto the virtual display
Add-Remove EPSON Virtual Display screen, the mouse pointer returns to the screen display area.
Depending on the computer, the movie playback screen in Media Player may not be displayed, and the screen
saver preview may not be displayed normally.
Remedy
User's Guide "Network Menu (EB-Z8050W only)"
Remedy
g
, use PowerPoint 2003 or later, or limit the number of virtual
Remedy
Remedy
g
. When the virtual display checkbox is cleared on the
Remedy
52