Changing Settings Using A Web Browser (Web Control); Displaying Web Control; Entering The Ip Address Of The Projector; Projector Setup - Epson EB-Z8050W Operation Manual

Changing Settings Using a Web Browser (Web Control)

You can set up and control the projector from a computer by using
the Web browser of a computer that is connected to the projector via a
network. Setup and control operations can be performed remotely if this
function is used. In addition, since you can use the computer's
keyboard, entering characters required for setup is easier.
Use Microsoft Internet Explorer 6.0 or later as the Web browser. If
using a Macintosh, you can also use Safari. If, however, you are using
Safari under Mac OS X 10.2.8, some of the Web control radio buttons
may not be displayed properly.
Setup and control with a Web browser are possible if Network On
q
is set from the Extended menu of the projector's Configuration
Menu, even if the projector is in Standby Mode (when the power
is off).

Displaying Web Control

Use the following procedure to display Web Control.
If your Web browser is set up to connect via a proxy server, Web
q
Control cannot be displayed. To use Web Control, you need to
make network connection settings with a device other than a proxy
server.

Entering the IP address of the projector

Web Control can be opened by specifying the IP address of the
projector as follows when using Advanced Connection Mode.
Procedure
A
Start the Web browser on the computer.
B
Enter the IP address of the projector in the address input
box of the Web browser, and press the [Enter] key on the
computer's keyboard.
Web Control is displayed.
When Web Control Password is set in the Network menu from
the projector's Configuration Menu, enter the Password. Enter the
characters set for the Web Control Password.

Projector Setup

You can set items that are usually set in the projector's Configuration
Menu. The contents set are reflected in the Configuration Menu. There
are also items that can only be set in the Web browser.
Items in the Configuration menu that cannot be set by the web
browser
All items in the Configuration Menu can be set with the exception of
the following items.
• Signal Menu - DVI/HDMI Video Range
• Settings Menu - Keystone - Quick Corner
• Settings Menu - Pointer Shape
• Settings Menu - Test Pattern
• Settings Menu - User Button
• Extended Menu - registering User's Logo
• Extended Menu - Operation - BNC Sync Termination
• Extended Menu - Language
• Extended Menu - Operation - High Altitude Mode
• Extended Menu - Operation - Shutter Timer
• Reset Menu - Reset All
The items available on each menu are the same as the Configuration
Menu of the projector.
User's Guide "List of Functions"
s
42