Problems Concerning Network Functions; Cannot Connect Using Easymp Network Projection; When A Connection Is Made Using Easymp Network Projection, The Projected; The Projector Is Not Found When Easymp Network Projection Is Started - Epson EB-Z8050W Operation Manual

Troubleshooting

Problems Concerning Network Functions

Cannot connect using EasyMP Network Projection

Check the message on the screen and then apply the following countermeasures.
Error Messages
The application version used is not supported. Install the latest
version of the application on your computer.
When a connection is made using EasyMP Network Projection, the projected image remains as is, and a connection cannot be made
from another computer.
Check
Did the presenter leave the conference room without cutting off
the network connection?

The projector is not found when EasyMP Network Projection is started.

Check
Is the Wireless LAN unit connected?
For Wireless LAN
Is the Network Configuration screen from the Configuration
menu displayed on the projector?
Are the computer's LAN card and the built-in LAN function
available?
Install the current version of EasyMP Network Projection from the EPSON Projector Software for Meeting &
Monitoring CD-ROM supplied with the projector.
With EasyMP Network Projection, the connection with the computer that was previously connected can be cut
off when another computer tries to connect with the projector, and it connects with the computer that is trying to
connect.
Therefore, when a Projector keyword is not set for the projector, or if you know the Projector keyword, you can
cut off the current connection and, if you perform a connection operation, you can connect to the projector.
When a Projector keyword is set for the projector, if you do not know the Projector keyword, restart the projector
and reconnect.
Check that the optional Wireless LAN unit is securely connected.
When the Network Configuration screen is displayed on the projector, network connection for EasyMP Network
Projection is disabled. Close network settings on the projector, and return to the LAN standby screen.
Check that LAN is valid by checking Control Panel - System - Hardware in the device manager and so on.
Remedy
Remedy
Remedy
50