Epson EB-Z8050W Operation Manual page 15

Using the Connection Screen
Busy (Disable
interrupt con-
nection)
Currently in
use by another
application
Searching
Not found.
D
Projector name
The projector's name is displayed.
E
Disable interrupt connection
Check the box to prevent an interrupt connection by other computers while con-
nected to the selected projector.
F
Use multi-display
Check the box to use the Multi-screen display function. When this is selected,
Display layout and Display properties are displayed at the bottom of the screen.
p.20
s
G
Troubleshooting
If there is a problem and you cannot have a connection, press this button to
open the EasyMP Network Projection Troubleshooting screen.
H
Connect
Connect to the projector you selected from the search results list. When a con-
nection is made with a projector, a toolbar is displayed.
I
Set options
You can make general setting options such as the processing method when start-
ing up EasyMP Network Projection. For details, see Set options s
J
Save in the profile
Saves the results of a search for projectors on the network as a Profile.
p.32
s
Cannot be selected. Disable interrupt
connection is set on another computer
which is already connected.
The projector's Configuration Menu is
open. You can select it after closing the
Configuration menu and running the
search again.
Displayed while running Manual search or
Profile.
Displayed when a projector cannot be
found as a result of Manual search or
Profile. In Quick Connection Mode, you
can only select multiple projectors with the
same SSID.
p.37
K
Clear list
Deletes all search results.
L
IP address (Advanced Connection Mode only)
The projector's IP address is displayed.
M
Display
Select the number displayed (when Use multi-display is selected). s
N
Profile
You can search for a projector on the network using a Profile saved us-
ing Save in the profile. s
O
SSID (Quick Connection Mode only)
The projector's SSID is displayed.
P
Signal intensity (Quick Connection Mode only)
As the Signal intensity increases, so does the number of lit Indicators.
Q
Update list (Quick Connection Mode only)
Updates Status and Signal intensity.
p.26
p.32
15